Removing and replacing the optical drive
Procedure
1.
on page 33).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
on page 33).
• Remove the server from the rack (
Removing the server from the rack
4.
on page 35).
5.
If installed, do the following:
a.
Remove the air baffle (
Removing and replacing the air baffle
b.
Remove the processor mezzanine tray (
Removing and replacing the processor mezzanine tray
page 43).
c.
Remove the 2P pass-through performance board (
Removing and replacing the 2P pass-through
on page 48).
6.
Removing and replacing the fan cage
on page 40).
7.
Remove the universal media bay (
Removing and replacing a universal media bay
on page 60).
8.
Remove the optical drive.
62
Removing and replacing the optical drive
Summary of Contents for ProLiant DL560 Gen10
