HP ProLiant DL560 Gen10 Maintenance And Service Manual Download Page 57

Page: 57 / 125

Removing and replacing a Smart Storage Battery

The server supports two Smart Storage Batteries, one each for the processor mezzanine board and the
system board.

Procedure

Power down the server (

Power down the server

on page 33).

Remove all power:

Disconnect each power cord from the power source.

Disconnect each power cord from the server.

Do one of the following:

• Extend the server from the rack (

Extend the server from the rack

on page 33).

• Remove the server from the rack (

Removing the server from the rack

on page 34).

Remove the access panel (

Removing the access panel

on page 35).

If installed, do the following:

Remove the air baffle (

Removing and replacing the air baffle

on page 39).

Remove the processor mezzanine tray (

Removing and replacing the processor mezzanine tray

page 43).

Remove the 2P pass-through performance board (

Removing and replacing the 2P pass-through

performance board

on page 48).

Remove the fan cage (

Removing and replacing the fan cage

on page 40).

Disconnect the smart storage battery cable from the system board.

Remove the smart storage battery.

Removing and replacing a Smart Storage Battery

Summary of Contents for ProLiant DL560 Gen10






























































































































Search results

Summary of Contents for ProLiant DL560 Gen10

Reviews:

Related manuals for ProLiant DL560 Gen10

Brands by name

Popular brands

HP ProLiant DL560 Gen10, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL560 Gen10

Reviews:

Related manuals for ProLiant DL560 Gen10

Brands by name

Popular brands