• Extend the server from the rack (
Extend the server from the rack
on page 33).
• Remove the server from the rack (
Removing the server from the rack
on page 34).
4.
Remove the access panel (
on page 35).
5.
If installed, remove the secondary PCIe riser cage (
Removing and replacing a PCIe riser cage
on page
51).
6.
on page 90).
7.
Remove the battery.
8.
To replace the component, reverse the removal procedure.
9.
Properly dispose of the old battery.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
Removing and replacing the system board
Procedure
1.
on page 33).
2.
Remove all power.
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
on page 33).
• Remove the server from the rack (
Removing the server from the rack
4.
on page 35).
5.
If installed, do the following:
68
Removing and replacing the system board
Summary of Contents for ProLiant DL560 Gen10
