HP ProLiant DL560 Gen10 Maintenance And Service Manual Download Page 43

Page: 43 / 125

Removing and replacing the processor mezzanine tray

Procedure

Power down the server (

Power down the server

on page 33).

Remove all power:

Disconnect each power cord from the power source.

Disconnect each power cord from the server.

Do one of the following:

• Extend the server from the rack (

Extend the server from the rack

on page 33).

• Remove the server from the rack (

Removing the server from the rack

on page 34).

Remove the access panel (

Removing the access panel

on page 35).

Remove the processor mezzanine tray.

Removing and replacing a processor-heatsink module

Before performing this procedure, Hewlett Packard Enterprise recommends

identifying the processor-

heatsink module components

Procedure

Observe the following alerts.

CAUTION:

When handling the heatsink, always hold it along the top and bottom of the fins. Holding it from the
sides can damage the fins.

Removing and replacing the processor mezzanine tray

Summary of Contents for ProLiant DL560 Gen10






























































































































Search results

Summary of Contents for ProLiant DL560 Gen10

Reviews:

Related manuals for ProLiant DL560 Gen10

Brands by name

Popular brands

HP ProLiant DL560 Gen10, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant DL560 Gen10

Reviews:

Related manuals for ProLiant DL560 Gen10

Brands by name

Popular brands