HP ProLiant DL560 Gen10, Maintenance And Service Manual

Page: 59 / 125

Removing and replacing an eight-bay NVMe SSD drive cage
Procedure
1. Power down the server ( Power down the server on page 33).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack ( Extend the server from the rack on page 33).
• Remove the server from the rack ( Removing the server from the rack on page 34).
4. Remove the access panel ( Removing the access panel on page 35).
5. If installed, do the following:
a. Remove the air baffle ( Removing and replacing the air baffle on page 39).
b. Remove the processor mezzanine tray ( Removing and replacing the processor mezzanine tray on
page 43).
c. Remove the 2P pass-through performance ( Removing and replacing the 2P pass-through
performance board on page 48).
6. Remove the fan cage ( Removing and replacing the fan cage on page 40).
7. Disconnect all cables from the drive backplane.
8. Remove the drive cage.
Removing and replacing an eight-bay NVMe SSD drive cage 59