HP OmniBook VT6200, Manual

Page: 86 / 189

Add-On Devices
Connecting External Devices
86 Corporate Evaluator’s Guide
Installing a docking tray
Your dock requires a tray that accommodates your specific computer model. Install this
tray prior to connecting the computer to the dock. If you don’t have an F tray or other
compatible tray, you’ll need to purchase HP accessory F2012B. You cannot use the
E tray designed for the original Omnibook 6000 series.
1. Slide the rear of the tray into the dock as shown on the dock label.
2. Push down firmly on both sides of the tray until it snaps into place.
To remove a tray from the dock, pull the latch (at the center front of the dock) towards
you until the tray pops free.
Docking the computer
The computer can be on, suspended, or off when docking.
1. Connect power to the dock—the type of connection depends on the dock. See the
manual that came with the dock.