HP OmniBook VT6200 Manual Download Page 16

Page: 16 / 189

Getting Started with Your HP Notebook
Identifying Parts of the Computer

Corporate Evaluator’s Guide

Identifying Parts of the Computer

Front View

1. One-Touch

buttons.

2. Sleep button. Suspends and resumes operation.

3. Keyboard status lights.

4. Power slide button. Turns the computer on and off.

5. Built-in

microphone.

6. Pointing stick (on certain models).

7. Touch pad, click and scroll buttons, plus on-off

button (on certain models).

8. Main status lights (left to right): power mode, hard

disk activity, main battery, and secondary battery.

9. Module eject latch.

10. Volume control.

11. Audio-off button and audio-off light.

12. Audio jacks (left to right): audio out (headphones),

external microphone, audio in (on certain models).

13. Infrared port.

14. S-video port.

15. System-off switch.

16. Kensington lock slot (security connector).

17. Computer open/close latch.

Summary of Contents for OmniBook VT6200






























































































































































































Search results

Summary of Contents for OmniBook VT6200

Reviews:

Related manuals for OmniBook VT6200

Brands by name

Popular brands

HP OmniBook VT6200, Manual

Search results

Summary of Contents for OmniBook VT6200

Reviews:

Related manuals for OmniBook VT6200

Brands by name

Popular brands