HP OmniBook VT6200 Manual Download Page 14

Page: 14 / 189

Getting Started with Your HP Notebook
Taking Inventory

Corporate Evaluator’s Guide

To buy accessories

You can buy accessories for your computer online. For the latest accessories and options,
visit the HP Notebook Web site (www.hp.com/notebooks).

HP currently offers docking solutions, plug-in modules, cables, and other accessories,
such as the following:

•

AC adapter.

•

Floppy disk drive module.

•

External floppy disk drive cable.

•

Plug-in modules, such as CD-ROM drive, DVD drive, CD read/write drive, Zip drive,
second hard disk drive.

•

Replacement hard disk drive module.

•

Main battery.

•

Secondary battery.

•

External battery charger.

•

Docking products.

Summary of Contents for OmniBook VT6200






























































































































































































Search results

Summary of Contents for OmniBook VT6200

Reviews:

Related manuals for OmniBook VT6200

Brands by name

Popular brands

HP OmniBook VT6200, Manual

Search results

Summary of Contents for OmniBook VT6200

Reviews:

Related manuals for OmniBook VT6200

Brands by name

Popular brands