HP Neoware m100 User Manual Download Page 243

Page: 243 / 256

Error Code Reference

Error Codes

233

-177

Remote file is newer.

-178

Local file is same as the remote file.

-179

LSD command failed.

-180

MLST command failed.

-181

Invalid response for MLST command.

-182

MLST command is not available.

-183

MLSD command is not available.

-184

STAT command failed.

-185

STAT for file command is not available.

-186

NLST command failed.

-187

NLST for file command is not available.

-188

No file or directory error.

-189

Cannot tell if file exists.

-190

File exists but cannot find the file type.

-191

Is not a directory.

-192

Recursion limit is reached.

-193

Control socket is timeout.

-194

Data socket is timeout.

-195

User canceled the FTP task.

-1000

Invalid XML format.

-1001

Invalid XML version.

-1002

Failure executing clone task.

-1003

Unknown task ID.

-1004

Unknown parameter.

Error Code

Description

Summary of Contents for Neoware m100

































































































































































































































































Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands

HP Neoware m100, User Manual

Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands