HP Neoware m100 User Manual Download Page 242

Page: 242 / 256

Error Code Reference

232

Error Codes

-153

Disconnected by FTP server when login in.

-154

Invalid user.

-155

Invalid password.

-156

Failed to login.

-157

Invalid relay from server.

-158

Connection is closed by peer.

-159

Not connected.

-160

Cannot start data transfer.

-161

Failed to transfer data.

-162

PORT command failed.

-163

PASV command failed.

-164

UTIME command failed.

-165

UTIME command is not available.

-166

HELP command failed.

-167

Failed to delete local file.

-168

Failed to seek local file.

-169

Data transfer is aborted.

-170

Symbol link is failed.

-171

Symbol link is not available.

-172

Glob is not match.

-173

FEAT command is not available.

-174

Specified file is not found.

-175

No buffer.

-176

Local file is newer.

Error Code

Description

Summary of Contents for Neoware m100

































































































































































































































































Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands

HP Neoware m100, User Manual

Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands