HP Neoware m100 User Manual Download Page 229

Page: 229 / 256

219

HP Device Manager User Manual

APPENDIX C

Error Code
Reference

This appendix explains the meaning of error codes which may be
generated by HP Device Manager

Error Codes

The following table lists the error codes which may be generated
by HP Device Manager and explains their meaning

Error Code

Description

Success.

Could not connect with target Management Agent.

The system cannot find the file specified.

The system cannot find the path specified.

The system cannot open the file.

Access is denied.

Report is received, but the report is corrupt or malformed.

Task is not found in the Management Gateway.

Management Agent information is lost in Management Gate-
way. Management Server is synchronizing Management
Agent information with Management Gateway. Please resend
the task another time.

Management Gateway failed to send task to Agent.

Summary of Contents for Neoware m100

































































































































































































































































Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands

HP Neoware m100, User Manual

Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands