HP Neoware m100 User Manual Download Page 132

Page: 132 / 256

Common Tasks

122

Changing Device Settings

Changing Device Settings

The setup configuration of a device can be changed using templates
listed on the

Settings

tab in the

Template Pane

The following sections provide an overview of each template.

Configuring
Network Settings

Select the

Settings

tab in the

Template Pane

Double-click the

_Network Settings

template to display the

Template Editor

Enter the network settings as required.

Note:

DHCP

is enabled (default), the device will not use static

IP information. If you want to use static IP, select

Disable

Summary of Contents for Neoware m100

































































































































































































































































Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands

HP Neoware m100, User Manual

Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands