manualshive.com logo in svg

HP Neoware m100, User Manual, Page: 75 / 256

Share
Download
HP Neoware m100 User Manual Download Page 75

Using the HP Management Console

Device Management

65

Device Tree Icons

On the 

Gateway

 tab, a 

G

 icon indicates a Management Gateway:

A green 

G

 icon represents a gateway that is currently active.

A greyed-out 

G

 icon represents a gateway that is currently 

down or disconnected.

On the 

OS

 tabs, devices are represented by the following icons:

A folder represents a number of devices that have been 
grouped together using the grouping schemes function.

A screen icon with a power symbol over it indicates that cur-
rently the status of this device cannot be confirmed because a 
gateway to the device cannot be found.

A greyed-out screen icon with an exclamation mark over it 
indicates the device is currently powered-off.

A screen icon with a curved arrow over it indicates the device 
is currently in pull mode.

A screen icon with a curved arrow and padlock over it 
indicates the device is currently in pull-lock mode (Enhanced 
Write Filter is ON).

A screen icon with a straight arrow over it indicates the device 
is currently in push mode.

A screen icon with a straight arrow and padlock over it 
indicates the device is currently in push-lock mode.

Summary of Contents for Neoware m100

































































































































































































































































Reviews:

No comments