HP Neoware m100 User Manual Download Page 96

Page: 96 / 256

Using the HP Management Console

Searching for a Device in the Device Tree

Searching for a Device in the Device Tree

You can quickly display a particular device in the Console’s device
tree either by selecting

Device

Search Device Tree

from the menu

bar, or by clicking the

Search

button in the toolbar.

The

Search Device

dialog will be displayed.

You can find a device either by entering its IP Address, Host Name,
Device ID or Device Serial Number, as specified in the

Find Device

field. Enter the relevant information in the field below then click

Find

. If the device is found, the console will automatically change

the display to show the device in the device tree.

Summary of Contents for Neoware m100

































































































































































































































































Search results

Summary of Contents for Neoware m100

Reviews:

HP Neoware m100, User Manual, Page: 96 / 256

Search results

Summary of Contents for Neoware m100

Reviews: