HP Neoware m100 User Manual Download Page 186

Page: 186 / 256

Advanced Tasks

176

Configuring Agents

Updating the Agent
Version

The

_Update Agent

template enables you to apply the latest version

of the Agent file to client devices. Agent update files must be added
to an FTP Repository using

Repository Management

before they

can be applied to client devices.

Double-click the

_Update Agent

template on the

Agent

tab of

the

Template Pane

Specify the location of the Agent update files by selecting from
the

FTP Repository

list.

Click the

Verify Files On FTP

button to check whether the correct

Agent files are located on the specified FTP Repository.

Click

Save as...

to save the template with a new name.

Drag and drop the template on the device(s) you want to update.

Summary of Contents for Neoware m100

































































































































































































































































Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands

HP Neoware m100, User Manual

Search results

Summary of Contents for Neoware m100

Reviews:

Related manuals for Neoware m100

Brands by name

Popular brands