manualshive.com logo in svg

HP Neoware m100, User Manual, Page: 159 / 256

Share
Download
HP Neoware m100 User Manual Download Page 159

Advanced Tasks

Images

149

10

Click 

OK

 

to apply the task to the device.

When the HP Management Agent on the client receives the task, 
the client will display a warning message indicating that the 
device will reboot in 15 seconds.

The client will shutdown then start-up in DOS mode and run the 
utility which copies the contents of the flash storage to an 

.img

 

file in the FTP Repository. Note that this may take several 
minutes.

The progress of the image creation task will be indicated in the 

Tasks

 pane of the Console.

When the task has been completed successfully, the client will 
reboot as normal and the 

Tasks

 pane will indicate the task has 

finished.

An image file has now been created in the FTP Repository you 
specified in step 4.

Summary of Contents for Neoware m100

































































































































































































































































Reviews:

No comments