HP Neoware m100, User Manual

Page: 129 / 256

Common Tasks
Changing Connection Settings 119
Changing Connection Settings
HP thin client devices are designed to access servers or applications
through pre-defined ICA, RDP, terminal emulation or Web browser
connections. HP Device Manager enables you to copy these pre-
defined connection settings from one thin client to others of the
same model and operating system type.
Important: Before copying the connection settings of a device, you
must make sure that each connection is properly configured and
tested on the network where the connections will be used.
1
Configure a thin client device with the required connection
settings and ensure that the connections work on the network
where they will be used.
2
Run the Management Console and display the name of the
device with the correct connections in the device tree.
3
Select the
Connections
tab in the
Template Pane
, then double-
click on the
_Get Connection Configuration
template to display
the
Template Editor
.
4
Use the check boxes to indicate which connection settings to
retrieve from the device.
5
Enter a name for the template which will be created to store the
connection settings.