manualshive.com logo in svg

HP NAS 4000s, Administration Manual

The HP NAS 4000s delivers efficient storage solutions. Ensure a seamless setup process by downloading the free Installation Manual from our website manualshive.com. This comprehensive manual provides step-by-step instructions on how to optimize your product's performance, resulting in hassle-free operations. Access it now and maximize the potential of your HP NAS 4000s.

Share
Download
background image

Cluster Administration

216

NAS 4000s and 9000s Administration Guide

Cluster Resource Overview

Hardware and software components that are managed by the cluster service are called cluster 
resources.

Resources represent individual system components. These resources are then organized into 
groups and managed as a group. 

Some resources are created automatically by the system and other resources must be set up 
manually.

Resource Types:

■

IP Address resource

■

Cluster name resource

■

Cluster Quorum disk resource

■

Physical Disk resource

■

Virtual server name resources

■

CIFS file share resources

■

NFS file share resources

File Share Resource Planning Issues

CIFS and NFS are cluster aware protocols that support the Active/Active cluster model, 
allowing resources to be spread out and processed on both nodes at the same time. For 
example, some NFS file share resources can be assigned to a group owned by a virtual server 
for NodeA and additional NFS file share resources can be assigned to a group owned by a 
virtual server for NodeB.

Configuring the file shares as cluster resources provides for high availability of file shares. 
Because the resources are placed into groups, ownership of the files can easily move from one 
node to the other, as circumstances require. If the cluster node owning the group of file shares 
should be shut down or fail, the other node in the cluster will begin sharing the directories until 
the original owner node is brought back on line. At that time, ownership of the group and its 
resources can be brought back to the original owner node.

Resource Planning

1. Create at least one virtual server for each node in the cluster. 

A virtual server is a resource group consisting of an IP Address resource and a Network 
Name resource. Ownership of these virtual servers should be assigned to the different 
server nodes. In addition to providing load balancing capabilities, the virtual server allows 
for the transition of group resources in failover situations.

2. Create a virtual server group for each node in the cluster.

Cluster resource groups are used to balance the processing load on the servers. Distribute 
ownership of the groups between the virtual servers.

3. For NFS environments, configure the NFS server.

NFS specific procedures include entering audit and file lock information as well as setting 
up client groups and user name mappings. These procedures are not unique to a clustered 
deployment and are detailed in the “Microsoft Services for NFS” chapter. Changes to NFS 
setup information are automatically replicated to all nodes in a cluster.

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

IBM 2210 Installation And Initial Configuration Manual preview
2210
Brand: IBM Pages: 72
D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Brand: D-Link Pages: 2
IBM Netfinity 6000R User Reference Manual preview
Netfinity 6000R
Brand: IBM Pages: 218
IBM eserver xSeries 440 Troubleshooting Manual preview
eserver xSeries 440
Brand: IBM Pages: 74
IBM eserver xSeries 440 Installation Manual preview
eserver xSeries 440
Brand: IBM Pages: 98
IBM eserver xSeries 440 User Manual preview
eserver xSeries 440
Brand: IBM Pages: 84
IBM Eserver xSeries 360 Type 8686 User Reference Manual preview
Eserver xSeries 360 Type 8686
Brand: IBM Pages: 184
IBM eserver xSeries 350 Installation Manual preview
eserver xSeries 350
Brand: IBM Pages: 62
IBM eServer xSeries 135 Installation Manual preview
eServer xSeries 135
Brand: IBM Pages: 62
IBM TotalStorage DS4800 Installation, User And Maintenance Manual preview
TotalStorage DS4800
Brand: IBM Pages: 250
IBM TotalStorage DS4800 User, Installation And Maintenance Manual preview
TotalStorage DS4800
Brand: IBM Pages: 234
IBM eserver pSeries 690 User Manual preview
eserver pSeries 690
Brand: IBM Pages: 212
IBM T400 Setup, Operation, And Service Manual preview
T400
Brand: IBM Pages: 136
IBM System x3690 X5 At-A-Glance Reference Manual preview
System x3690 X5
Brand: IBM Pages: 32
IBM System x3690 X5 At-A-Glance Manual preview
System x3690 X5
Brand: IBM Pages: 33
IBM System x3690 X5 Installation And User Manual preview
System x3690 X5
Brand: IBM Pages: 180
IBM System Storage DS5020 Overview preview
System Storage DS5020
Brand: IBM Pages: 31
IBM Netfinity EXP300 Hardware Maintenance Manual preview
Netfinity EXP300
Brand: IBM Pages: 93

Brands by name

Popular brands

Load more brands