manualshive.com logo in svg

HP NAS 4000s, Administration Manual

The HP NAS 4000s delivers efficient storage solutions. Ensure a seamless setup process by downloading the free Installation Manual from our website manualshive.com. This comprehensive manual provides step-by-step instructions on how to optimize your product's performance, resulting in hassle-free operations. Access it now and maximize the potential of your HP NAS 4000s.

Share
Download
background image

Cluster Administration

208

NAS 4000s and 9000s Administration Guide

Cluster Installation

During the installation process, nodes will be shut down and rebooted. These steps are 
necessary to guarantee that the data on disks that are attached to the shared storage bus is not 
lost or corrupted. This can happen when multiple nodes try to simultaneously write to the same 
disk that is not yet protected by the cluster software.

Use 

Table 14

 to determine which nodes and storage devices should be presented during each 

step.

To configure the Cluster service on the HP StorageWorks NAS server, an account must have 
administrative permissions on each node. All nodes must be member servers within the same 
domain. It is not acceptable to have a mix of domain controllers and member servers in a 
cluster.

Setting Up Networks

Each cluster node requires at least two network adapters—one to connect to a public network, 
and one to connect to a private network consisting of cluster nodes only.

The private network adapter establishes node-to-node communication, cluster status signals, 
and cluster management. Each node's public network adapter connects the cluster to the public 
network where clients reside.

Verify that all network connections are correct, with private network adapters connected to 
other private network adapters only, and public network adapters connected to the public 
network.

Table 14:  Power Sequencing for Cluster Installation

Step

Node 1

Additional 

Nodes

Storage

Comments

Setting Up 

Networks

On

On

Not 

Presented

Verify that all storage devices on the 

shared bus are not presented. Power 

on all nodes.

Setting up 

Shared Disks

On

Off

Presented

Shutdown all nodes. Present the 

shared storage, then power on the 

first node.

Verifying Disk 

Configuration

Off

On

Presented

Shut down first node, power on next 

node. Repeat this process for all 

cluster nodes.

Configuring the 

First Node

On

Off

Presented

Shutdown all nodes; power on the 

first node.

Configuring 

additional 

Nodes

On

On

Presented

Power on the next node after the first 

node is successfully configured. 

Complete this process for all cluster 

nodes.

Post-installation

On

On

Presented

At this point all cluster nodes should 

be on.

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

IBM 610 Technical Overview And Introduction preview
610
Brand: IBM Pages: 40
H3C H3C S7500E-X Command Reference Manual preview
H3C S7500E-X
Brand: H3C Pages: 16
H3C SR6600 SPE-FWM Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 24
StarTech.com IDECASE35SAT Instruction Manual preview
IDECASE35SAT
Brand: StarTech.com Pages: 8
3onedata NP318T-8DI Quick Installation Manual preview
NP318T-8DI
Brand: 3onedata Pages: 4
I-O DATA HFAS1-XS20U Setup Manual preview
HFAS1-XS20U
Brand: I-O DATA Pages: 49
IBM eServer 380 xSeries User Reference Manual preview
eServer 380 xSeries
Brand: IBM Pages: 112
B&B Electronics Vlinx Serial Servers ESP901E Manual preview
Vlinx Serial Servers ESP901E
Brand: B&B Electronics Pages: 92
IBM System Storage N3150 Installation And Setup Instructions preview
System Storage N3150
Brand: IBM Pages: 24
Gateway DX4320 Hardware Installation Manual preview
DX4320
Brand: Gateway Pages: 64
Amit CDD531AM-U02 User Manual preview
CDD531AM-U02
Brand: Amit Pages: 75
Goobay 93122 User Manual preview
93122
Brand: Goobay Pages: 20
Plasmon MOD 910 User Manual preview
MOD 910
Brand: Plasmon Pages: 33
NetComm Dynalink 3G8WV Setup Manual preview
Dynalink 3G8WV
Brand: NetComm Pages: 34
Enterasys X-Pedition XSR-1850 Getting Started Manual preview
X-Pedition XSR-1850
Brand: Enterasys Pages: 114
TYANO TS65A-B8036 Service Engineer'S Manual preview
TS65A-B8036
Brand: TYANO Pages: 102
Korenix JetNet 5720G-8P Series Quick Installation Manual preview
JetNet 5720G-8P Series
Brand: Korenix Pages: 52
Intermec Norand 6920 Reference Manual preview
Norand 6920
Brand: Intermec Pages: 232

Brands by name

Popular brands

Load more brands