manualshive.com logo in svg

HP NAS 4000s, Administration Manual

The HP NAS 4000s delivers efficient storage solutions. Ensure a seamless setup process by downloading the free Installation Manual from our website manualshive.com. This comprehensive manual provides step-by-step instructions on how to optimize your product's performance, resulting in hassle-free operations. Access it now and maximize the potential of your HP NAS 4000s.

Share
Download
background image

Microsoft Services for NFS

163

NAS 4000s and 9000s Administration Guide

Microsoft Services for Unix 3.0 CD has been included with the NAS server and is needed for 
the following procedure.

To install the Authentication software on the domain controllers (CD Method):

1. Insert the Microsoft Windows Services for UNIX compact disc into the CD-ROM drive of 

the domain controller. 

2. In the Microsoft Windows Services for UNIX Setup Wizard dialog box, click Next. 

3. In the User name box, type your name. If the name of your organization does not appear in 

the Organization box, type the name of your organization there. 

4. In the CD Key boxes, type the product key found on the back of the CD-ROM case, and 

then click Next. 

5. Read the End User License Agreement carefully. If you accept the terms of the agreement, 

click I accept the terms in the License Agreement, and then click Next to continue 
installation. If you click I do not accept the License Agreement (Exit Setup), the 
installation procedure terminates. 

6. Click Custom Installation, and then click Next. 

7. In the Components pane, click the down arrow next to Windows Services for UNIX, and 

then click Entire component will not be available. 

8. Click the plus sign (+) next to Authentication Tools. 

9. In the Components pane, click the plus sign (+) next to Authentication Tools. 

10. Click Server for NFS Authentication, click Will be installed on local hard drive, and 

then click Next. 

11. Follow the remaining instructions in the Wizard. 

Note:  

NFS users can be authenticated using either Windows domain accounts or local accounts on 

the Windows server. Server for NFS Authentication must be installed on all domain controllers in the 

domain if NFS users will be authenticated using domain accounts. Server for NFS Authentication is 

always installed on the 9000s (or 4000s depending), which also runs the Server for NFS.

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

NEC Express5800/T110g-S Configuration Manual preview
Express5800/T110g-S
Brand: NEC Pages: 34
Quantum Scalar i6000 Installation Manual preview
Scalar i6000
Brand: Quantum Pages: 384
Tandberg Data DLT-V4 Product Specification preview
DLT-V4
Brand: Tandberg Data Pages: 60
NEC Express5800/R310e-E4 User Manual preview
Express5800/R310e-E4
Brand: NEC Pages: 86
Planet ADSL 2/2+ Router with USB Port ADE-3410v2 User Manual preview
ADSL 2/2+ Router with USB Port ADE-3410v2
Brand: Planet Pages: 62
H3C UniServer R6900 G5 Installation, Quick Start preview
UniServer R6900 G5
Brand: H3C Pages: 17
IESC 12H-2410 User Manual preview
12H-2410
Brand: IESC Pages: 109
IBM TotalStorage DS4200 Installation, User'S, And Maintenance Manual preview
TotalStorage DS4200
Brand: IBM Pages: 222
BHU NETWORKS BXM2 User Manual preview
BXM2
Brand: BHU NETWORKS Pages: 75
Planet IGS-5225-20T4C2X Quick Installation Manual preview
IGS-5225-20T4C2X
Brand: Planet Pages: 16
Convex CSMD2-B440 User Manual preview
CSMD2-B440
Brand: Convex Pages: 19
Zoom Realtek Series User Manual preview
Realtek Series
Brand: Zoom Pages: 31
Oase WECS II 2048/DMX/02 Operating Instructions Manual preview
WECS II 2048/DMX/02
Brand: Oase Pages: 67
Dot Hill AssuredSAN 4004 Series Fru Installation And Replacement Manual preview
AssuredSAN 4004 Series
Brand: Dot Hill Pages: 59
Ubiquiti UniFi UAS-PRO Quick Start Manual preview
UniFi UAS-PRO
Brand: Ubiquiti Pages: 28
IBM 88701RX User Manual preview
88701RX
Brand: IBM Pages: 98
Xantech RT1610 Installation Instructions Manual preview
RT1610
Brand: Xantech Pages: 6
QNAP TS 31P2 Series User Manual preview
TS 31P2 Series
Brand: QNAP Pages: 45

Brands by name

Popular brands

Load more brands