manualshive.com logo in svg

HP NAS 4000s, Administration Manual

The HP NAS 4000s delivers efficient storage solutions. Ensure a seamless setup process by downloading the free Installation Manual from our website manualshive.com. This comprehensive manual provides step-by-step instructions on how to optimize your product's performance, resulting in hassle-free operations. Access it now and maximize the potential of your HP NAS 4000s.

Share
Download
background image

System Overview

28

NAS 4000s and 9000s Administration Guide

Network

The Network option contains system settings, including system identification, global settings, 
interfaces settings, administration settings, Telnet settings, and SNMP settings.

Disks

Use this option to manage disks, volumes, disk quotas, and shadow copies.

Users

Use this option to manage local users and groups.

Shares

The administrator creates folders and shares to control access to files. When a share is created, 
the administrator indicates the protocols that can be supported by that share as well as the 
users and groups of users that have access. Protocol parameters are entered in this Shares 
option. See Chapter 6 for additional information.

Array Management

Manage arrays and pathing software from this tab.

Maintenance

Maintenance tasks include setting date and time, performing system restarts and shutdowns, 
viewing audit logs, setting up Email alerts, linking to remote management, and selecting and 
configuring your UPS. 

HP Utilities

Access HP system management utilities such as remote management, enable floppy boot, File 
and Print Services for NetWare, and the HP System Management WebUI.

Cluster

Use this option to configure and manage the cluster.

Help

This option contains help information for the WebUI.

Welcome Screen Contents

Installation Overview

Use to set up and configure the NAS server. This is an online, supplemental guide. A more 
comprehensive paper document is provided in the country kit that shipped with the server.

Rapid Startup Wizard

Use this utility to enter system setup and configuration information.

Set Administrator Password

Create a password for the server appliance administrator.

Take a Tour

Learn how to use the NAS server.

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Brand: QTech Pages: 120
QNAP TS-1273U User Manual preview
TS-1273U
Brand: QNAP Pages: 62
QNAP HS-210 Hardware User Manual preview
HS-210
Brand: QNAP Pages: 130
Intellinet 523318 Instructions preview
523318
Brand: Intellinet Pages: 2
RuggedCom RUGGEDSWITCH RS900G Hardware Installation Manual preview
RUGGEDSWITCH RS900G
Brand: RuggedCom Pages: 23
GarrettCom Magnum 10ETS Hardware Installation And User'S Manual preview
Magnum 10ETS
Brand: GarrettCom Pages: 55
WiebeTech RTX400-SV User Manual preview
RTX400-SV
Brand: WiebeTech Pages: 5
Mobily NTC-40WV-QSG Quick Start Manual preview
NTC-40WV-QSG
Brand: Mobily Pages: 12
HPE ProLiant ML110 Gen 10 Product End-Of-Life Disassembly Instructions preview
ProLiant ML110 Gen 10
Brand: HPE Pages: 5
Samsung STORY Station User Manual preview
STORY Station
Brand: Samsung Pages: 35
B&B Electronics EIR618 Series Quick Start Manual preview
EIR618 Series
Brand: B&B Electronics Pages: 2
Huawei 6974463710582 Quick Start Manual preview
6974463710582
Brand: Huawei Pages: 9
Huawei E5186 Quick Start Manual preview
E5186
Brand: Huawei Pages: 46
Huawei 31010GAS Quick Start Manual preview
31010GAS
Brand: Huawei Pages: 2
Huawei 31010GEV Quick Start Manual preview
31010GEV
Brand: Huawei Pages: 3
Huawei B535-232 Quick Start Manual preview
B535-232
Brand: Huawei Pages: 88
Huawei E5573 Quick Start Manual preview
E5573
Brand: Huawei Pages: 128
Huawei B525 Quick Start Manual preview
B525
Brand: Huawei Pages: 124

Brands by name

Popular brands

Load more brands