manualshive.com logo in svg

HP NAS 4000s, Administration Manual

The HP NAS 4000s delivers efficient storage solutions. Ensure a seamless setup process by downloading the free Installation Manual from our website manualshive.com. This comprehensive manual provides step-by-step instructions on how to optimize your product's performance, resulting in hassle-free operations. Access it now and maximize the potential of your HP NAS 4000s.

Share
Download
background image

Cluster Administration

221

NAS 4000s and 9000s Administration Guide

Creating File Share Resources

To create a file share resource:

1. Open the WebUI to the Cluster tab and select Cluster Resources.

2. Click Create. 

3. Select Next to proceed with the wizard.

4. Specify the Share name, description, the cluster group the share will reside in and the 

resource type. The resource type should be File Share.

Note:  

A file share resource must reside in the same cluster group as the physical disk resource it will 

reside on.

Figure 123:  Creating a file share resource

5. Click Next.

6. Select the possible owners and click Next to continue.

7. Specify the dependencies for the file share resource. The physical disk should always be 

selected as a dependency. It is also possible to set the file share to be dependent on the 
network name for the cluster group it will reside in. If a dependency is set on the network 
name the file share resource will not come online until the network name resource does. 
Select Next to continue. 

Note:  

The physical disk resource specified in this step must reside in the same cluster group as 

specified in the beginning of this wizard.

8. Specify the share name, path, and user limit and click Next to continue.

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

DB GROUP HERRAJES 803 Assembly Instruction preview
803
Brand: DB GROUP HERRAJES Pages: 4
NEC Built-In AIT User Manual preview
Built-In AIT
Brand: NEC Pages: 59
Accelerated 6330-MX User Manual preview
6330-MX
Brand: Accelerated Pages: 10
Accelerated 6300-CX Customer Setup Instructions preview
6300-CX
Brand: Accelerated Pages: 4
Campbell SC115 Product Manual preview
SC115
Brand: Campbell Pages: 32
Paradyne Hotwire 6212 Quick Installation Instructions preview
Hotwire 6212
Brand: Paradyne Pages: 2
Paradyne FrameSaver SLV 9126 Installation Instructions Manual preview
FrameSaver SLV 9126
Brand: Paradyne Pages: 24
Watchguard XTM 5 Series Hardware Manual preview
XTM 5 Series
Brand: Watchguard Pages: 24
TP-Link TD-8817 User Manual preview
TD-8817
Brand: TP-Link Pages: 73
Supermicro SUPERSERVER 5018D-MHR7N4P User Manual preview
SUPERSERVER 5018D-MHR7N4P
Brand: Supermicro Pages: 126
Allied Telesis AT-8000C Declaration Of Conformity preview
AT-8000C
Brand: Allied Telesis Pages: 1
LTS LTAH103C Hardware Integration Manual preview
LTAH103C
Brand: LTS Pages: 5
American Megatrends StorTrends 1312-P Specifications preview
StorTrends 1312-P
Brand: American Megatrends Pages: 2
1&1 Homeserver+ Quick Start Manual preview
Homeserver+
Brand: 1&1 Pages: 32
HPE G2 R8000 3U WW ERM Product End-Of-Life Disassembly Instructions preview
G2 R8000 3U WW ERM
Brand: HPE Pages: 3
POCKetec POCKEY User Manual preview
POCKEY
Brand: POCKetec Pages: 19
Hunter Pro-C Series Programming Instructions preview
Pro-C Series
Brand: Hunter Pages: 2
BELINEA o.center User Manual preview
o.center
Brand: BELINEA Pages: 53

Brands by name

Popular brands

Load more brands