HP NAS 4000s Administration Manual Download

Page: 15 / 246

About this Guide

NAS 4000s and 9000s Administration Guide

Conventions

Conventions consist of the following:

■

Document Conventions

■

Text Symbols

■

Equipment Symbols

Document Conventions

The document conventions included in

Table 1

apply in most cases.

Text Symbols

The following symbols may be found in the text of this guide. They have the following
meanings:

WARNING:

Text set off in this manner indicates that failure to follow directions in the

warning could result in bodily harm or death.

Caution:

Text set off in this manner indicates that failure to follow directions could result in

damage to equipment or data.

Note:

Text set off in this manner presents commentary, sidelights, or interesting points of

information.

Table 1: Document Conventions

Element

Convention

Cross-reference links

Figure 1

Key and field names, menu items, buttons, and

dialog box titles

Bold

File names, application names, and text

emphasis

Italics

User input, command and directory names,

and system responses (output and messages)

Monospace font

COMMAND NAMES

are uppercase monospace

font unless they are case sensitive

Variables

<monospace, italic font>

Website addresses

Sans serif font text:

http://www.hp.com

Summary of Contents for NAS 4000s























































































































































































































































Search results

Summary of Contents for NAS 4000s

Reviews:

Related manuals for NAS 4000s

Brands by name

Popular brands

HP NAS 4000s, Administration Manual

Search results

Summary of Contents for NAS 4000s

Reviews:

Related manuals for NAS 4000s

Brands by name

Popular brands