HP NAS 4000s Page 142 Administration Manual Download | Manualshive

Page: 142 / 246

background image

Folder, Printer, and Share Management

142

NAS 4000s and 9000s Administration Guide

DFS Protocol Settings

With Distributed File System (DFS) and the Windows SMB protocol, files can be distributed
across multiple servers and appear to users as if they reside in one place on the network. A
configuration containing multiple shares is known as a virtual namespace.

Using Distributed File System (DFS), system administrators can make it easy for users to
access and manage files that are physically distributed across a network. Users do not need to
know and specify the actual physical location of files in order to access them.

For example, if documents are scattered across multiple servers in a domain, DFS can make it
appear as though the documents all resides on a single server. This eliminates the need for
users to go to multiple locations on the network to find the information.

Each DFS namespace requires a root. A DFS root is a starting point of the DFS namespace.
The root is often used to refer to the namespace as a whole. A root maps to one or more root
targets, each of which corresponds to a shared folder on a server. A root is implemented as a
shared folder on the DFS server.

Deploying DFS

A distributed file system can be implemented as a stand-alone root distributed file system or as
a domain root distributed file system. The type of a distributed file system determines which
client computers can access the distributed file system.

A stand-alone DFS root:

■

Does not use Active Directory to manage DFS

■

Cannot have more than one root on a server

■

Does not support automatic file replication using the File Replication service (FRS)

■

Is not fault tolerant and if the root fails the entire namespace will collapse.

A domain DFS root:

■

Must be hosted on a domain member server

■

Has its DFS namespace automatically published to Active Directory

■

Can have more than one root on a server

■

Supports automatic file replication through FRS

■

Supports fault tolerance through FRS

Two points of management of the DFS namespace are provided with the NAS server. These
points of management are the WebUI and the Distributed File System Administration Tool
located on the local console of the NAS server under Start > Programs > Administrative
Tool. See

Figure 81

. The WebUI is designed to provide the following functions:

■

Stand alone root management (Add, Delete)

■

Share publishing to stand alone or domain DFS

■

Default behavior for DFS share publishing

All other functions must be performed via the DFS Administration Tool. The NAS server
administration guide only provides instructions on the Web UI portion of the product. The
DFS Administration Tool is complete with online help. In addition, general information on
DFS may be found at:

http://www.microsoft.com/windowsserver2003/techinfo/overview/dfs.mspx

«
...
140
141
142
143
144
...
»

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink

Brand: Tyco Electronics Pages: 18

eServer 200 xSeries

Brand: IBM Pages: 128

eServer 232 xSeries

Brand: IBM Pages: 174

Brand: Backyard Pages: 63

Brand: QNO Pages: 106

Brand: Face Pages: 8

ID ISC.LRM200-A/B

Brand: Feig Electronic Pages: 20

Brand: Lantech Pages: 49

Digital Audio Server

Brand: CAAS Audio Pages: 23

Brand: BELINEA Pages: 53

Dynalink MyZone 3G24W

Brand: NetComm Pages: 5

Brand: Overland Storage Pages: 4

Brand: RackSolutions Pages: 8

MaxAttach NAS 4000

Brand: Maxtor Pages: 2

TigerSwitch 100 SMC6924VF

Brand: SMC Networks Pages: 174

Brand: IBM Pages: 70

Wireless Kit 108MBPS

Brand: Topcom Pages: 100

Brand: Alcatel-Lucent Pages: 612

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands