manualshive.com logo in svg

HP NAS 4000s, Administration Manual, Page: 227 / 246

Share
Download
HP NAS 4000s Administration Manual Download Page 227

Cluster Administration

227

NAS 4000s and 9000s Administration Guide

Creating Network Name Resources

1. Open the WebUI to the Cluster tab and select Cluster Resources.

2. Click Create. 

3. Select Next to proceed with the wizard.

4. Specify the name, description, the cluster group the resource will reside in and the 

resource type. The resource type should be Network Name.

5. Click Next.

6. Select the possible owners and click Next to continue.

7. Specify the dependencies and click Next to continue.

Figure 129:  Network Name Parameters

8. Select whether or not DNS registration must succeed and whether to enable kerberos 

authentication and click Next to continue.

9. Review the configuration and click Finish to create the resource.

10. After the resource is created it is necessary to bring it online. In the Cluster Resources 

page, select the resource and select Bring Online.

11. Click OK on the Bring a Resource Online page to bring the new resource online.

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments