manualshive.com logo in svg

HP NAS 4000s, Administration Manual

The HP NAS 4000s delivers efficient storage solutions. Ensure a seamless setup process by downloading the free Installation Manual from our website manualshive.com. This comprehensive manual provides step-by-step instructions on how to optimize your product's performance, resulting in hassle-free operations. Access it now and maximize the potential of your HP NAS 4000s.

Share
Download
background image

Disk Management

87

NAS 4000s and 9000s Administration Guide

Disk Quotas

Disk quotas track and control disk space use in volumes.

Note:  

To limit the size of a folder or share, see “Directory Quotas” in Chapter 7.

Configure the volumes on the server to perform the following tasks:

■

Prevent further disk space use and log an event when a user exceeds a specified disk space 
limit. 

■

Log an event when a user exceeds a specified disk space warning level.

When enabling disk quotas, it is possible to set both the disk quota limit and the disk quota 
warning level. The disk quota limit specifies the amount of disk space a user is allowed to use. 
The warning level specifies the point at which a user is nearing his or her quota limit. For 
example, a user's disk quota limit can be set to 50 megabytes (MB), and the disk quota warning 
level to 45 MB. In this case, the user can store no more than 50 MB on the volume. If the user 
stores more than 45 MB on the volume, the disk quota system logs a system event.

In addition, it is possible to specify that users can exceed their quota limit. Enabling quotas 
and not limiting disk space use is useful to still allow users access to a volume, but track disk 
space use on a per-user basis. It is also possible to specify whether or not to log an event when 
users exceed either their quota warning level or their quota limit.

When enabling disk quotas for a volume, volume usage is automatically tracked from that 
point forward, but existing volume users have no disk quotas applied to them. Apply disk 
quotas to existing volume users by adding new quota entries on the Quota Entries page. 

Enabling Quota Management

When enabling disk quotas on a volume, every user’s disk volume usage is monitored and 
treated differently, depending on the quota management settings for the specific user. 

To enable quota management on a volume:

1. On the primary navigation bar, click Disks. 

2. Click Volumes. 

3. Select the volume to manage. 

4. In the Tasks list, click Set Default Quota. 

5. On the Default Quota for volume page, select Use quota limits to manage use of the 

volume. 

6. If desired, select Deny disk space to users exceeding quota limit to enable that 

restriction. 

7. Specify the default quota limit and warning level for new users on this volume. 

8. Specify which quota events should be logged. 

9. Click OK. 

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

JCG Q8 Quick Start Manual preview
Q8
Brand: JCG Pages: 2
Ubee DVW3201B User Manual preview
DVW3201B
Brand: Ubee Pages: 9
OCCITALINA OXTOPUS EIA-709 User Manual preview
OXTOPUS EIA-709
Brand: OCCITALINA Pages: 54
XAVI Technologies Corp. 7721r User Manual preview
7721r
Brand: XAVI Technologies Corp. Pages: 71
SanDisk Mobile Ultra Memory Stick Micro User Manual preview
Mobile Ultra Memory Stick Micro
Brand: SanDisk Pages: 1
Korenix AnyBus-X Installation Leaflet preview
AnyBus-X
Brand: Korenix Pages: 2
Elementia Materials Plycem Eureka Tank Installation Manual preview
Plycem Eureka Tank
Brand: Elementia Materials Pages: 6
Macsense MIH-108 User Manual preview
MIH-108
Brand: Macsense Pages: 39
Moxa Technologies NPort W2150Plus Series User Manual preview
NPort W2150Plus Series
Brand: Moxa Technologies Pages: 167
Qeedji SAP10e User Manual preview
SAP10e
Brand: Qeedji Pages: 58
Supermicro SSG-927R-E2CJB User Manual preview
SSG-927R-E2CJB
Brand: Supermicro Pages: 62
Dahua EVS71 Series User Manual preview
EVS71 Series
Brand: Dahua Pages: 246
Allied Telesis FS750/16 Installation Manual preview
FS750/16
Brand: Allied Telesis Pages: 44
I-O DATA HDC-UXW Setup Manual preview
HDC-UXW
Brand: I-O DATA Pages: 2
P.Lindberg 9065890 Manual preview
9065890
Brand: P.Lindberg Pages: 22
3Com Router 3000 Series Manual preview
Router 3000 Series
Brand: 3Com Pages: 37
Supero SuperServer 5013G-M User Manual preview
SuperServer 5013G-M
Brand: Supero Pages: 104
Infrant Technologies ReadyNAS Duo User Manual preview
ReadyNAS Duo
Brand: Infrant Technologies Pages: 98

Brands by name

Popular brands

Load more brands