HP NAS 4000s Administration Manual Download | Manualshive

Page: 228 / 246

background image

Cluster Administration

228

NAS 4000s and 9000s Administration Guide

Basic Cluster Administration Procedures

■

Failing over and failing back

■

Restarting one cluster node

■

Shutting down one cluster node

■

Powering down all cluster nodes

■

Powering up all cluster nodes

Failing Over and Failing Back

As previously mentioned, when a node goes offline, all of the resources dependent on that
node are automatically failed over to another node. Processing continues, but in a reduced
manner because all operations must be processed on the remaining node(s). In clusters
containing more than two nodes additional failover rules can be applied. For instance, groups
can be configured to failover different nodes to balance the additional work load imposed by
the failed node. Nodes can be excluded from the possible owners list to prevent a resource
from coming online on a particular node. Lastly the preferred owners list can be ordered, to
provide an ordered list of failover nodes. Using these tools, the failover of resources can be
controlled with in a multimode cluster to provide a controlled balanced failover methodology
that balances the increased work load.

Because operating environments differ, the administrator must indicate whether the system
will automatically fail the resources (organized by resource groups) back to their original node
or will leave the resources failed over, waiting for the resources to be moved back manually.
See “Managing Cluster Resource Groups” for information on allowing or preventing failback
and moving these resources from one node to another.

Note:

If the NAS server is not set to automatically fail back the resources to their designated owner,

the resources must be moved back manually each time a failover occurs. See “Managing Cluster

Resource Groups” for information on overriding this default setting.

Restarting One Cluster Node

Caution:

Restarting a cluster node should be done only after confirming that the other

node(s) in the cluster are functioning normally. Adequate warning should be given to users

connected to resources of the node being restarted.

Attached connections can be viewed through the NAS Management Console on the NAS

Desktop using Terminal Services. From the NAS Management Console, select File Sharing,

Shared Folders, and Sessions.

The physical process of restarting one of the nodes of a cluster is the same as restarting a NAS
device in single node environment. However, additional caution is needed.

Restarting a cluster node causes all file shares served by that node to fail over to the another
node(s) in the cluster based on the failover policy in place. Until the failover process
completes, any currently executing read and write operations will fail. Other node(s) in the
cluster will be placed under a heavier load by the extra work until the restarted node comes up
and the resources are moved back.

«
...
226
227
228
229
230
...
»

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

Brand: G-Technology Pages: 32

Brand: G-Technology Pages: 35

Brand: PaloAlto Networks Pages: 2

Brand: TRENDnet Pages: 2

Brand: EnGenius Pages: 3

DTS 4132.timeserver

Brand: Mobatime Pages: 108

Brand: Eaton Pages: 2

SUPERSERVER 6028TP-HTFR

Brand: Supero Pages: 141

Brand: Sun Microsystems Pages: 138

FrameSaver DSL 9788 Router

Brand: Paradyne Pages: 28

Brand: Sollae Systems Pages: 27

Brand: Kikusui Pages: 6

Brand: Spectra Logic Pages: 15

Brand: Allied Telesis Pages: 128

Brand: TP-Link Pages: 2

G-RAID mini 1TB

Brand: G-Technology Pages: 13

Brand: Magnimage Pages: 42

Westermo Ibex-RT-330-5G Series

Brand: IBEX Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands