Basic Administrative Procedures and Setup Completion
41
NAS 4000s and 9000s Administration Guide
Adding and Configuring NICs in a Team
Before a NIC is teamed, verify the following:
■
The NICs must be on the same network.
■
The NICs must be DHCP enabled and the DNS server address must be left blank.
Note:
The teaming utility becomes unstable if static IP addresses, subnets, and DNS addresses are
set before teaming.
■
Duplex and speed settings must be set to use the default values.
To team the NICs:
1. Open the HP Network Teaming utility. The Network Teaming and Configuration
Properties dialog box is displayed. The type of NIC and the slot and port used is shown.
Figure 16: HP Network Teaming Properties dialog box
2. Highlight the NICs to team.
3. Click the Team button. The Teaming Controls tab of the Properties dialog box is
displayed.
Summary of Contents for NAS 4000s
Page 18: ...About this Guide 18 NAS 4000s and 9000s Administration Guide ...
Page 92: ...Disk Management 92 NAS 4000s and 9000s Administration Guide ...
Page 196: ...NetWare File System Management 196 NAS 4000s and 9000s Administration Guide ...
Page 246: ...Index 246 NAS 4000s and 9000s Administration Guide ...
