HP NAS 4000s Administration Manual Download

Page: 118 / 246

User and Group Management

118

NAS 4000s and 9000s Administration Guide

Adding a New Group

To add a group:

1. In the Local Groups dialog box, click New.

The Create New Group dialog box is displayed.

Figure 61: Create New Group dialog box, General tab

2. Enter the group name and description.

3. To indicate the user members of this group, click Members. See “Modifying Group

Properties” for procedural instructions on entering group members.

4. After all group information is entered, click OK. The group is added, and the Local

Groups dialog box is displayed again.

Deleting a Group

To delete a group:

1. From the Local Groups dialog box, select the group to delete, and then click Delete.

2. The Delete Group dialog box is displayed. Verify that this is the intended group and then

click OK. The Local Groups dialog box is displayed again.

Summary of Contents for NAS 4000s























































































































































































































































Search results

Summary of Contents for NAS 4000s

Reviews:

Related manuals for NAS 4000s

Brands by name

Popular brands

HP NAS 4000s, Administration Manual

Search results

Summary of Contents for NAS 4000s

Reviews:

Related manuals for NAS 4000s

Brands by name

Popular brands