manualshive.com logo in svg

HP NAS 4000s, Administration Manual

The HP NAS 4000s delivers efficient storage solutions. Ensure a seamless setup process by downloading the free Installation Manual from our website manualshive.com. This comprehensive manual provides step-by-step instructions on how to optimize your product's performance, resulting in hassle-free operations. Access it now and maximize the potential of your HP NAS 4000s.

Share
Download
background image

Disk Management

69

NAS 4000s and 9000s Administration Guide

Array Configuration Utility (MSA1000 and internal OS drives only)

RAID arrays and LUNs are created and can be managed using the HP Array Configuration 
Utility.

Features of ACU: 

■

Graphical representation of drive array configurations with wizards that help optimize 
array configuration 

■

Online spare (hot spare) configuration 

■

Separate fault tolerance configurations on a logical drive (LUN) basis 

■

Easy capacity expansion of arrays 

■

Online RAID level and stripe size migration 

■

Manages OS and data drives 

Each time the Array Configuration Utility is run, it analyzes the configuration of the Array 
Controllers installed in the system. From the Main page various options are available to 
change or reconfigure the controller(s). This document only covers a subset of the functions 
available in the ACU. For complete documentation on ACU, refer to the comprehensive online 
help found within the ACU tool.

Using the ACU to Configure Storage

To configure storage:

1. Open the WebUI and navigate to the Disks tab.

2. Click Array Management.

Figure 32:  Array Management screen

3. Click Array Configuration Utility.

Summary of Contents for NAS 4000s























































































































































































































































Reviews:

No comments

Related manuals for NAS 4000s

Makita RF1101 Parts Breakdown preview
RF1101
Brand: Makita Pages: 2
F5 ARX-2500 Installation Manual preview
ARX-2500
Brand: F5 Pages: 2
F5 WANJet 400 Appliance Upgrade Instructions preview
WANJet 400 Appliance
Brand: F5 Pages: 11
ICP DAS USA MSM-508 Quick Start preview
MSM-508
Brand: ICP DAS USA Pages: 4
Cambium Networks PMP 450 Series User Manual preview
PMP 450 Series
Brand: Cambium Networks Pages: 215
Planet GSW-1602SF User Manual preview
GSW-1602SF
Brand: Planet Pages: 20
trueCall Call Recorder Manual preview
Call Recorder
Brand: trueCall Pages: 16
OCZ Z-DRIVE R2 M84 512GB PCI-EXPRESS SSD Datasheet preview
Z-DRIVE R2 M84 512GB PCI-EXPRESS SSD
Brand: OCZ Pages: 2
DANE-ELEC So Mobile SuperSpeed Datasheet preview
So Mobile SuperSpeed
Brand: DANE-ELEC Pages: 1
Macsense MIH-108 User Manual preview
MIH-108
Brand: Macsense Pages: 39
YearGoo 2.5” Solid State Drive Manual preview
2.5” Solid State Drive
Brand: YearGoo Pages: 6
Solwise 3GWIFIMRD User Manual preview
3GWIFIMRD
Brand: Solwise Pages: 231
Buffalo BS-GS2008P Quick Setup Manual preview
BS-GS2008P
Brand: Buffalo Pages: 2
Enterasys Security Router X-PeditionTM User Manual preview
Security Router X-PeditionTM
Brand: Enterasys Pages: 466
Western Digital Ultrastar Serv60+8 User Manual preview
Ultrastar Serv60+8
Brand: Western Digital Pages: 406
INOVU CHROME BOX 2.5 L User Manual preview
CHROME BOX 2.5 L
Brand: INOVU Pages: 30
ADTRAN NetVanta 1335 Series Quick Start Manual preview
NetVanta 1335 Series
Brand: ADTRAN Pages: 4
Dedicated Micros MSUA1T25 Setup And Maintenance Manual preview
MSUA1T25
Brand: Dedicated Micros Pages: 12

Brands by name

Popular brands

Load more brands