Hardware options installation 77
c.
Secure the power cord with the strain relief strap.
16.
Employ best practices to route and manage the power cords and other cables in the server rear
panel.
IMPORTANT:
When using cable management arm components, be sure to leave enough
slack in each of the cables to prevent damage to the cables when the server is extended from
the rack.
17.
If removed, install the Smart Storage Battery holders ("
Installing an HPE Smart Storage Battery
" on
page
48
).
18.
If removed, install the Smart Storage Battery and connect the cable to the system board ("
Installing
an HPE Smart Storage Battery
" on page
48
).
19.
Install the air baffle (on page
24
).
20.
Install the access panel (on page
21
).
21.
Do one of the following:
o
Slide the server into the rack.
o
Install the server into the rack ("
Installing the server into the rack
" on page
30
).
22.
Connect each power cord to the server.
23.
Connect each power cord to the power source.
24.
Power up the server (on page
17
).
25.
If removed, install the security bezel ("
Security bezel option
" on page
36
).
HPE Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (
http://www.hpe.com/info/qs
).
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1.
Installing the Trusted Platform Module board (on page
78
).
2.
Retaining the recovery key/password (on page
79
).
3.
Enabling the Trusted Platform Module (on page
80
).
Enabling the TPM requires accessing BIOS/Platform Configuration (RBSU) in UEFI System Utilities
("
HPE UEFI System Utilities
" on page
98
).
Summary of Contents for hpe proliant dl20 gen9
