Hardware options installation 67
8.
Install the DIMM.
9.
Install the air baffle (on page
24
).
10.
Install the access panel (on page
21
).
11.
Do one of the following:
o
Slide the server into the rack.
o
Install the server into the rack ("
Installing the server into the rack
" on page
30
).
12.
Connect each power cord to the server.
13.
Connect each power cord to the power source.
14.
Power up the server (on page
17
).
15.
If removed, install the security bezel ("
Security bezel option
" on page
36
).
After installing the DIMMs, use BIOS/Platform Configuration (RBSU) in the UEFI System Utilities ("
HPE
UEFI System Utilities
" on page
98
) to configure the memory protection mode.
FlexibleLOM riser cage assembly
For more information on the riser board slot specifications, see "PCIe riser board slot definitions (on page
10
)."
For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (
http://www.hpe.com/info/qs
).
To install the component:
1.
If installed, remove the security bezel (on page
17
).
2.
Power down the server (on page
17
).
3.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
4.
Do one of the following:
o
Extend the server from the rack (on page
18
).
o
Remove the server from the rack (on page
19
).
5.
Remove the access panel (on page
20
).
6.
Remove the existing PCI riser cage ("
Remove the PCI riser cage
" on page
22
).
Summary of Contents for hpe proliant dl20 gen9
