Hardware options installation 38
5.
Remove the two metal brackets from the drive carrier.
6.
Install the drive in the carrier.
7.
Install the drive.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
8.
Connect each power cord to the server.
9.
Connect each power cord to the power source.
10.
Power up the server (on page
17
).
11.
If removed, install the security bezel ("
Security bezel option
" on page
36
).
To configure arrays, see the
HPE Smart Storage Administrator User Guide
on the Hewlett Packard
Enterprise website (
http://www.hpe.com/info/smartstorage/docs
).
Installing a hot-plug drive
Summary of Contents for hpe proliant dl20 gen9
