Creating HP Backup and Recovery (HPBR) media
NOTE:
HPBR is only supported on Windows XP systems. For details, refer to the documentation on
the Supplemental Software -
HP Backup and Recovery
CD included with the workstation. The
documentation can be accessed during installation.
The Initial Recovery Point can be burned to optical media and used to recover a system. This section
describes making the media.
NOTE:
The workstation must have a CD or DVD writer to create the media set.
To create HPBR recovery media:
1.
The Initial Recovery Point was captured when the RestorePlus! media set was created previously.
If the IRP was not created, start the HP Backup and Recovery Manager and create recovery points
using the Expert mode. Follow the HPBR online documentation for instructions.
2.
Burn the IRP to media from HPBR.
Select
HPBR Start > All Programs > HP Backup & Recovery > HP Backup and Recovery
Manager
.
3.
Select
Next
at the first screen.
Select
Create recovery CDs or DVDs to recover the system
, and then select
Next
.
4.
Choose
Next
to display a list of available CD image and the recovery points.
5.
Check the box next to Initial Recovery Point, and then select
Next
.
6.
Follow the instructions to create the media.
26
Chapter 3 Restoring the operating system
ENWW
