HP Compaq t1010, Supplementary Manual

Page: 132 / 320

118
Connection Configuration
The following table discusses the functions of a Telnet connection.
Table 17-1 TCP/IP Telnet Configuration
Function Description
Host Port Number Enter the Telnet host port number. The default is 23.
Local Port Number Implemented to allow connection to Misys hosts. This
allows the host to communicate back to the emulator
on a different port than the emulator uses to talk to the
host. The default is 0.
Telnet Name Enter the Telnet virtual terminal name. The default
depends on emulation (VT400, 7-bit, default is vt420).
Suppress Use the functions of this group box as needed (controls
in this area become active depending on the type of
emulation selected):
• Echo (default)
• 3270 Regime
• TN3270E
• TN5250E
Force Negotiation Use the Binary and EOR drop-down scroll lists to
configure negotiation parameters. The default for
Binary is No and the default for EOR is No.
Break Settings Use the TM with Break and CR with Break check
boxes to configure break settings.