HP Compaq t1010, Supplementary Manual, Page: 98 / 320

Connection Configuration
79
Dial-In Connection
Note
This section applies only to the SE Model terminals.
Choose Dial-In Connection, then click on the Next button. The following sequence
of dialog boxes displays. Use them to set up your dial-in ICA connection.
Figure 10-12 Dial-In Devices Dialog Box
To use the Dial-In Devices dialog box:
1. From the Dial-In Device drop-down scroll list, select one of the following:
a. A modem connection such as Hayes Compatible on Com1.
b. A serial connection such as Serial Cable on Com1.
2. Enter the area code, the phone number, and the country code in the appropriate
fields.
3. Click on Configure to use the Device Properties dialog box. (See “Using the
Device Properties Dialog box” for information on the Device Properties dialog
box).
4. See Figure 10-6 through Figure 10-11 and the related text for information about
the remainder of the dialog boxes in this sequence.
When you are finished with the configuration, the Connection Manager displays,
listing your new ICA connection.