HP Compaq t1010, Supplementary Manual, Page: 127 / 320

112
Connection Configuration
c. Click on Next. The Automate Login Process dialog box displays. See
Figure 16-4 and proceed with these instructions.
4. If you clicked on Serial:
a. Make a selection from Connect To.
b. Use the Configure command button if appropriate. (See “Using the
Configuration of Serial Cable on Com1 (or Com2) Dialog Box” for information
about the Configure command button).
c. Click on Next. The Automate Login Process dialog box displays. See
Figure 16-4 and proceed with these instructions.
Figure 16-4 TE Client Connection Wizard - Automate Login Process
To use the Automate Login Process dialog box:
1. Fill in the Parameters group box as appropriate using the following functions:
a. Set Initiation String - Set the scripts initiation string.
b. Wait For - Act on an selected event in the Act On list such as login.