manualshive.com logo in svg

HP 48GII, User Manual

Share
Download
HP 48GII User Manual Download Page 655

 

 

Page 21-6 

 

DO: 

DO-UNTIL-END construct for loops 

 

WHILE: WHILE-REPEAT-END construct for loops 

TEST:  Comparison operators, logical operators, flag testing functions 
TYPE:    Functions for converting object types, splitting objects, etc. 
LIST: 

Functions related to list manipulation 

 

ELEM:  Functions for manipulating elements of a list 

 

PROC:  Functions for applying procedures to lists 

GROB:  Functions for the manipulation of graphic objects 
PICT:  Functions for drawing pictures in the graphics screen 
CHARS: Functions for character string manipulation 
MODES: Functions for modifying calculator modes 
 

FMT: 

To change number formats, comma format 

 ANGLE: 

To change angle measure and coordinate systems 

 

FLAG:  To set and un-set flags and check their status 

 

KEYS:  To define and activate user-defined keys (Chapter 20) 

 

MENU: To define and activate custom menus (Chapter 20) 

 

MISC:  Miscellaneous mode changes (beep, clock, etc.) 

IN: 

Functions for program input 

OUT:  Functions for program output 
TIME:  Time-related functions  
 

ALRM: Alarm manipulation 

ERROR: Functions for error handling  
 

IFERR:  IFERR-THEN-ELSE-END construct for error handling 

RUN:  Functions for running and debugging programs 
 

Navigating through RPN sub-menus 

Start with the keystroke combination 

„°

, then press the appropriate soft-

menu key (e.g., 

@)@MEM@@

 ).  If you want to access a sub-menu within this sub-

menu (e.g., 

@)@DIR@@

  within the 

@)@MEM@@

  sub-menu), press the corresponding key.   

To move up in a sub-menu, press the 

L 

key until you find either the 

reference to the upper sub-menu (e.g.,  

@)@MEM@@

  within the 

@)@DIR@@

  sub-menu) or 

to the PRG menu (i.e., 

@)@PRG@@

 ).   

 

Functions listed by sub-menu 

The following is a listing of the functions within the PRG sub-menus listed by 
sub-menu.

 

Summary of Contents for 48GII

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands