manualshive.com logo in svg

HP 48GII, User Manual, Page: 55 / 864

Share
Download
HP 48GII User Manual Download Page 55

 

 

Page 1-26 

• 

To navigate through the many options in the DISPLAY MODES input form, 
use the arrow keys: 

š™˜—

. 

• 

To select or deselect any of the settings shown above, that require a check 
mark, select the underline before the option of interest, and toggle the 

soft menu key until the right setting is achieved.  When an option is 

selected, a check mark will be shown in the underline (e.g., the 

Textbook

 

option in the 

Stack:

 line above).   Unselected options will show no check 

mark in the underline preceding the option of interest (e.g., the 

_Small, 

_Full page, 

and 

_Indent

 options in the 

Edit:

 line above). 

• 

To select the Font for the display, highlight the field in front of the 

Font:

 

option in the DISPLAY MODES input form, and use the 

@CHOOS

 soft menu 

key (

B

). 

• 

After having selected and unselected all the options that you want in the 
DISPLAY MODES input form, press the 

@@@OK@@@

 soft menu key.  This will take 

you back to the CALCULATOR MODES input form.    To return to normal 
calculator display at this point, press the 

@@@OK@@@

 soft menu key once more.   

 
Selecting the display font

 

Changing the font display allows you to have the calculator look and feel 
changed to your own liking. By using a 6-pixel font, for example, you can 
display up to 9 stack levels!  Follow these instructions to select your display 
font: 
First, press the 

H

 button to activate the CALCULATOR MODES input form.  

Within the CALCULATOR MODES input form, press the 

@@DISP@

 soft menu key 

(

D

) to display the DISPLAY MODES input form.  The 

Font:

 field is 

highlighted, and the option 

Ft8_0:system 8

 is selected.  This is the default 

value of the display font.  Pressing the 

@CHOOS

 soft menu key (

B

), will 

provide a list of available system fonts, as shown below: 

 

The options available are three standard 

System Fonts 

(sizes 

8, 7, 

and 

6

) and 

a 

Browse..

 option.   The latter will let you browse the calculator memory for 

 

@

CHK@

Summary of Contents for 48GII

































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments