1-14
Figure 1-2
SSH client configuration interface
In the window shown in
Figure 1-2
, click
Open
. If the connection is normal, you will be prompted to enter
the username and password. After entering the correct username (
client001
) and password (
aabbcc
),
you can enter the configuration interface.
When Switch Acts as Server for Publickey Authentication
Network requirements
z
As shown in
Figure 1-3
, a local SSH connection is established between the host (the SSH client)
and the switch (the SSH server) for secure data exchange.
z
Publickey authentication is used, the algorithm is RSA.
Figure 1-3
Switch acts as server for publickey authentication
Configuration procedure
1) Configure the SSH server
# Generate RSA and DSA key pairs and enable SSH server.
<Switch> system-view
