1-7
If you adjust the PD disconnection detection mode when the device is running, the connected PDs will
be powered off. Therefore, be cautious to do so.
Enabling the PSE to Detect Nonstandard PDs
There are standard PDs and nonstandard PDs. Usually, the PSE can detect only standard PDs and
supply power to them. The PSE can detect nonstandard PDs and supply power to them only after the
PSE is enabled to detect nonstandard PDs.
Follow these steps to enable the PSE to detect nonstandard PDs:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the PSE to detect
nonstandard PDs
poe legacy enable pse
pse-id
Optional
Disabled by default.
Displaying and Maintaining PoE
To do…
Use the command…
Remarks
Display the mapping between ID,
module, and member ID of all PSEs.
display poe device
Display the power state and
information of the specified PoE
interface
display poe interface
[
interface-type
interface-number
]
Display the power information of a
PoE interface(s)
display poe interface power
[
interface-type interface-number
]
Display the information of PSE
display poe pse
[
pse-id
]
Display the power state and
information of all PoE interfaces
connected with the PSE
display poe pse
pse-id interface
Display the power of all PoE interfaces
connected with the PSE
display poe pse pse-id interface power
Display all information of the
configurations and applications of the
PoE configuration file
display poe-profile
[
index index
|
name profile-name
]
Display all information of the
configurations and applications of the
PoE configuration file applied to the
specified PoE interface
display poe-profile interface
interface-type interface-number
Available in
any view
