1-11
To do…
Use the command…
Remarks
Enter IPv6 address family view
ipv6-family
—
Enable IPv6 BGP route refresh
for a peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
capability-advertise
route-refresh
Optional
Enabled by default
Perform a manual soft-reset
If the peer does not support route-refresh, you can use the
peer keep-all-routes
command to save all
the route updates from the peer, and then use the
refresh bgp ipv6 multicast
command to soft-reset
IPv6 MBGP connections to refresh the IPv6 MBGP routing table and apply the new policy without
tearing down IPv6 MBGP connections.
Follow these steps to perform a manual soft-reset
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
—
Enter IPv6 MBGP address
family view
ipv6-family multicast
—
Keep all routes from a
peer/peer group regardless of
whether they pass the inbound
filtering policy
peer
{
ipv6-group-name |
ipv6-address
}
keep-all-routes
Required
Not kept by default
Exit to user view
return
—
Soft-reset IPv6 MBGP
connections manually
refresh bgp
ipv6 multicast
{
all
|
ipv6-address
|
group
ipv6-group-name
|
external
|
internal
} {
export
|
import
}
Optional
Configuring the Maximum Number of Equal-Cost Routes for Load-Balancing
Follow these steps to configure the maximum number of equal-cost routes for load-balancing:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
—
Enter IPv6 MBGP address
family view
ipv6-family multicast
—
Configure the maximum
number of equal-cost routes for
load balancing
balance
number
Required
By default, load balancing is
disabled.
