1-19
To do...
Use the command...
Remarks
Clear IGMP Snooping multicast
group information
reset
igmp-snooping group
{
group-address
|
all
} [
vlan
vlan-id
]
Available in
user view
Clear the statistics information of all
kinds of IGMP messages learned
by IGMP Snooping
reset igmp-snooping statistics
Available in
user view
z
The
reset igmp-snooping group
command works only on an IGMP Snooping–enabled VLAN, but
not on a VLAN with IGMP enabled on its VLAN interface.
z
The
reset igmp-snooping group
command cannot clear the IGMP Snooping multicast group
information for static joins.
IGMP Snooping Configuration Examples
Configuring Group Policy and Simulated Joining
Network requirements
z
As shown in
Figure 1-3
, Router A connects to the multicast source through GigabitEthernet 1/0/2
and to Switch A through GigabitEthernet 1/0/1.
z
IGMPv2 is required on Router A, IGMP Snooping version 2 is required on Switch A, and Router A
will act as the IGMP querier on the subnet.
z
It is required that the receivers, Host A and Host B, attached to Switch A can receive multicast
traffic addressed to multicast group 224.1.1.1 only.
z
It is required that multicast data for group 224.1.1.1 can be forwarded through GigabitEthernet
1/0/3 and GigabitEthernet 1/0/4 of Switch A even if Host A and Host B accidentally, temporarily
stop receiving multicast data.
