2-3
Form
Description
acl ipv6
{
access-list-number
|
name
acl-name
}
Specifies to match an IPv6 ACL specified by its
number or name. The
access-list-number
argument specifies an ACL by its number, which
ranges from 2000 to 3999; the
name acl-name
keyword-argument combination specifies an
ACL by its name.
any
Specifies to match all packets.
customer-dot1p 8021p-list
Specifies to match packets by 802.1p priority of
the customer network. The
8021p-list
argument
is a list of CoS values, in the range of 0 to 7.
Even though you can provide up to eight
space-separated CoS values for this argument,
the Switch 4800G supports only one CoS value
in a rule. If you configure multiple CoS values in
a rule, the rule cannot be issued.
customer-vlan-id vlan-id-list
Specifies to match the packets of specified VLANs of
user networks. The
vlan-id-list
argument specifies a
list of VLAN IDs, in the form of
vlan-id to vlan-id
or
multiple discontinuous VLAN IDs (separated by
space). You can specify up to eight VLAN IDs for this
argument at a time. VLAN ID is in the range 1 to 4094.
In a class configured with the operator
and
, the logical
relationship between the customer VLAN IDs
specified for the
customer-vlan-id
keyword is
or
.
destination-mac mac-address
Specifies to match the packets with a specified
destination MAC address.
dscp
dscp-list
Specifies to match packets by DSCP
precedence. The
dscp-list
argument is a list of
DSCP values in the range of 0 to 63.
Even though you can provide up to eight
space-separated DSCP values for this
argument, the Switch 4800G supports only one
DSCP value in a rule. If you configure multiple
DSCP values in a rule, the rule cannot be issued.
ip-precedence
ip-precedence-list
Specifies to match packets by IP precedence.
The
ip-precedence-list
argument is a list of IP
precedence values in the range of 0 to 7.
Even though you can provide up to eight
space-separated IP precedence values for this
argument, the Switch 4800G supports only one
IP precedence value in a rule. If you configure
multiple IP precedence values in a rule, the rule
cannot be issued.
protocol
protocol-name
Specifies to match the packets of a specified protocol.
The
protocol-name
argument can be IP or IPv6.
