HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 13

Page: 13 / 142

Steps for Installation and Configuration

To install the appliance, complete these steps:

Unpack the appliance and make sure the six items are included in the box.

Attach its rubber feet

for desktop, rack shelf, or under-printer installation. For rackmount installation,

click here

Connect the cables and components

Configure the IP settings using the

front panel

(for the first time). The IP address can be changed

through the web interface if desired.

Access the web interface.

Under Network Settings, complete the

TCP/IP Network Settings

page.

Also under Network Settings, complete the

Microsoft Networking Settings page

to identify the WINS

server address and the Windows NT domain or workgroup. For NT Domain security, complete the other
fields on this page.

Install printers on clients

Back up the settings

Be sure to

(http://www.hp.com/go/printappliance_registration).

10.

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Search results

Summary of Contents for 4200 - LaserJet B/W Laser Printer

Reviews:

Related manuals for 4200 - LaserJet B/W Laser Printer

Brands by name

Popular brands

HP 4200 - LaserJet B/W Laser Printer, User Manual

Search results

Summary of Contents for 4200 - LaserJet B/W Laser Printer

Reviews:

Related manuals for 4200 - LaserJet B/W Laser Printer

Brands by name

Popular brands