manualshive.com logo in svg

HP 4200 - LaserJet B/W Laser Printer, User Manual

Share
Download
HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 43

Select the printer driver for the printer being added. If the driver is displayed in the Client Printer Driver

field, click 

. The 

Printers page

 will be displayed.

If the printer driver for the printer is not displayed in the drop down list on this page, click

. A 

security warning

 is displayed. Click "Yes" to continue and then follow the steps to

add the printer driver

 and associate it with the printer just added.

Note: After the appliance has been configured and drivers have been associated with printers, the configuration should
be 

backed up

.

Viewing and Managing Print Jobs

Use the Print Jobs page to view the jobs for a selected printer:

Print Jobs Page

Field Names

Description

File Name

Name of the file(s) or print job(s) for this printer.

User

Name of the client user who submitted each print job.

Size

Size of the print job (in bytes).

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands