HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 134

Page: 134 / 142

Level: Informational

Category: Administrative

Description: The configuration settings for the appliance have been restored successfully from
the backup using the

Restore feature

in the web interface (under General).

Added administrator account (409)

Level: Informational

Category: Administrative

Description: The administrator account has been added to the appliance successfully using the

Add Administrator feature

in the web interface.

Deleted administrator account (410)

Level: Informational

Category: Administrative

Description: The administrator account was deleted from the appliance successfully using the

Delete Administrator feature

in the web interface.

Changed WINS server address (411)

Level: Informational

Category: Administrative

Description: The WINS server address has been successfully changed on the

Microsoft

Networking Settings page

in the web interface.

Changed Windows domain or workgroup name (412)

Level: Informational

Category: Administrative

Description: The Windows NT domain or workgroup name has been changed successfully on
the

Microsoft Network Settings page

Enabled NT domain authentication (413)

Level: Informational

Category: Administrative

Description: NT domain authentication has been enabled on the

Microsoft Network Settings

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Search results

Summary of Contents for 4200 - LaserJet B/W Laser Printer

Reviews:

Related manuals for 4200 - LaserJet B/W Laser Printer

Brands by name

Popular brands

HP 4200 - LaserJet B/W Laser Printer, User Manual

Search results

Summary of Contents for 4200 - LaserJet B/W Laser Printer

Reviews:

Related manuals for 4200 - LaserJet B/W Laser Printer

Brands by name

Popular brands