manualshive.com logo in svg

HP 4200 - LaserJet B/W Laser Printer, User Manual

Share
Download
HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 101

Answers

Configuration

Can I use Web Jetadmin to manage my appliance?

No. However, Web Jetadmin will be able to discover a configured appliance and allow the embedded
web server to be launched from the Web Jetadmin interface.

1.  

Does the appliance support bootp or rarp?

No. But the appliance does support DHCP.

2.  

What features on the Properties Page in Network Neighborhood are supported by the appliance?

The appliance uses the printer configuration page on the Printer Properties window (which is displayed
after right-clicking on a printer and then selecting Properties) for driver configuration changes and
recognizes some other settings, such as security settings. However, the appliance does not recognize
many of the settings if they are changed using these driver management tools.

General tab

Comments text field - supported

■   

Location text field - supported

■   

Driver dropdown - the driver can be changed if and only if the driver is an initialized
driver; otherwise, the administrator will be prompted to change the driver through the
appliance's web interface so that the driver can be initialized.

■   

New Driver button - the driver can be uploaded to the appliance, but will not be
associated with this printer until the administrator uses the appliance's web interface to
change the driver so that it can be initialized.

■   

Separator Page button - not supported

■   

Print Processor button - not supported

■   

Print Test Page button - supported

■   

❍   

Ports tab (all buttons are disabled for remote printers)

Enable bi-directional support checkbox - not supported

■   

Enable printer pooling checkbox - not supported

■   

❍   

Scheduling tab

Availability - should be left on "Always"; print jobs submitted during unavailable time
will be deleted and not spooled.

■   

Priority scale - not supported

■   

Spool print document so program finishes printing faster toggle - supported

■   

Print directly to the printer toggle - supported

■   

Hold mismatched documents check box - not supported

■   

Print spooled documents first check box - not supported (the appliance always uses this
behavior)

■   

Keep documents after they have printed check box - not supported

■   

❍   

Sharing tab

❍   

3.  

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands