manualshive.com logo in svg

HP 4200 - LaserJet B/W Laser Printer, User Manual

Share
Download
HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 70

 

Diagnostics (Configuration Summary)

Links to related documents:

Troubleshooting the Appliance

Viewing and Printing Diagnostics From the Web Interface

This document explains how to view and print the diagnostics and configuration parameters about the appliance
from the web interface. Diagnostics are shown on the Configuration Summary page. To access this page, select
Diagnostics (under General) on the menu. This page can be printed using the print function of the browser.

The Configuration Summary page has the following sections:

General Information on the Configuration Summary Page

TCP/IP Network Configuration Information

Microsoft Networking Configuration Information

LPD Configuration Information

Printer Information

Installed Printer Drivers Information

Network Statistics Information

General Information on the Configuration Summary Page

Parameter

Description

Model Name

HP Print Server Appliance 4200

Model Number

Model number of the appliance.

Current Firmware Revision

Current version of firmware running on this appliance.

Base (Factory) Firmware Revision

Version of firmware that the appliance would be rolled back to if
it was 

reset to factory defaults

.

BIOS Version

Version of the BIOS on the device.

Manufacturing Date Code

Manufacturing information for use by the factory.

Serial Number

Serial number of this unit.

Hard Drive Information

Hard drive's identifier code.

Operating System Restored

Date and time of last restore.

Data Area Restored

Date and time of last restore.

Spool Area Restored

Date and time of last restore.

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands