manualshive.com logo in svg

HP 4200 - LaserJet B/W Laser Printer, User Manual

Share
Download
HP 4200 - LaserJet B/W Laser Printer User Manual Download Page 72

Installed Printer Drivers Information

This section lists the printer drivers installed on this appliance.

Network Statistics Information

Parameter

Description

MAC Address

Unique network hardware address for this appliance.

Total Packets Received

Total number of network packets this unit has received since the
last reboot.

Total Packets Transmitted

Total number of network packets this unit has transmitted since
the last reboot.

Bad Packets Received

Total number of improperly formatted network packets received
since the last reboot. A large number of bad packets may indicate
network problems.

Received Packets Dropped

Number of packets dropped since the last reboot because the
receive buffer is full.

Framing Errors Received

Number of improperly formatted frames received since the last
reboot.

Transmit Packet Errors

Total number of errors that occurred since the last reboot while
attempting to transmit.

Transmit Packet Dropped

Number of packets dropped since the last reboot while attempting
to transmit because the receive buffer is full.

Transmit Packet Overruns

Number of packets dropped since the last reboot while attempting
to transmit because the receive buffer is full.

Transmit Collisions

Number of attempted transmit packets dropped since the last
reboot because of excessive collisions.

To refresh this page, click 

.

Summary of Contents for 4200 - LaserJet B/W Laser Printer















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands